Remote alarm indicator operating and annunciator terminal for medical isolated power monitoring system
You are here: Home » Products » Isolated Power Distribution » Medical IT Isolated Power Supply » Remote alarm indicator operating and annunciator terminal for medical isolated power monitoring system

Remote alarm indicator operating and annunciator terminal for medical isolated power monitoring system

AID120 alarm and display device is designed for visual and audible indication of alarm messages from ACREL medical intelligent insulation monitor and residual current monitor.

  • AID120
  • ACREL

Product Description

Overview
Brand:Acrel

Place of Origin:China

Standards:IEC 60364-7-710:2002

AID series and display device is a remote display and sound and light alarm device by using advanced fieldbus communications technology. Products can display the current insulation resistance,transformer load rate data and other monitoring data of AIM-M series medical intelligent insulation monitoring device real-time. Products emit sound and light alarm signal when system failure occurs. Products are classified according to the installation method and display. The device can be installed on the operaing room or information control pannel of intensive care unit, the medical staff can easily know the status of medical isolated power systems, and the type of fault when the system fails.


The remote alarm indicator can be installed next to the intelligence panel in the operating room and in the nurse station. It will send out alarm to notify relevant personnel to investigate and deal with hidden dangers in time.AID120 alarm and display device is designed for visual and audible indication of alarm messages from ACREL medical intelligent insulation monitor AIM-M10,AIM-M100,AIM-M200,and residual current monitor AIM-R100. It meets with the requirement of IEC 60364-7-710:2002.


Specifications

HG9A2439

AID120 Alarm And Display Device


● Remote monitoring

● LED indicators:On, Insulation, Overload, Overtemp

● Mute button

● Test button

● Auxiliary power supply: DC24V

● RS485(MODBUS-RTU)

● The insulation resistance alarm value, load current alarm value and transformer temperature alarm value of each system insulation monitoring instrument can be set up remotely.

● When there are insulation faults, overload, excessive temperature rise of the voltage transformer or wiring faults in any of the monitored system, centralized alarm and display instrument can provide corresponding sound and light alarm function, and can manually eliminate the alarm sound.

指示

Parameter

Dimension

dimension

Parameter


Power supply Voltage DC24V
Consumption ≤0.6W
Alarm range Insulation 50-999kΩ
Current 14A、18A、22A、28A、35A、45A
Temperature 0~+200℃
Alarm mode Audible and visual alarm
Alarm type Insulation fault,overload,overtemperature,device failure
Communication RS485,Modbus-RTU
Display mode LCD display,128*64 dot array
Dimension 172*87*63mm
Cut-out 158.5*74.5mm



QUICK LINKS

PRODUCT CATEGORIES

CONTACT US

  Phone:+86-18702109693
  Email: elena@acrel.cn
  Skype:elena@acrel.cn
  WhatsApp:+8618702109693
  Address: No. 253, Yulv Road, Jiading
       Zone, Shanghai, China

SEND US A MESSAGE
© 2003-2020 All Rights Reserved. Powered by Acrel    
Sitmap    丨    Support by sdzhidian