●ATC600-C wireless temperature transceiver
●Rail (DIN35mm) installation
●Support 240 points

●ATC450-C wireless temperature transceiver
●Rail (DIN35mm) installation or bolt fixing
●Support 60 points

ATE100M wireless temperature sensor has been developed in compliance with Specification for Wireless Temperature Measuring equipment, NB/T 42086-2016. It is suitable for 3-35kV indoor switchgears, including built-in switchgears, handcart switchgears, fixed switchgears and loop-net switchgears. It is also suitable for 0.4kV low-voltage switchgears such as fixed switchgears and drawer switchgears.

ATE400 wireless temperature sensor has been developed in compliance with Specification for Wireless Temperature Measuring equipment, NB/T 42086-2016. It is suitable for 3-35kV indoor switchgears, including built-in switchgears, handcart switchgears, fixed switchgears and loop-net switchgears. It is also suitable for 0.4kV low-voltage switchgears such as fixed switchgears and drawer switchgears.

ATE200 wireless temperature sensor has been developed in compliance with Specification for Wireless Temperature Measuring equipment, NB/T 42086-2016. It is suitable for 3-35kV indoor switchgears, including built-in switchgears, handcart switchgears, fixed switchgears and loop-net switchgears. It is also suitable for 0.4kV low-voltage switchgears such as fixed switchgears and drawer switchgears.

ARTM-8 series multi-input temperature controller can measure and control multi temperature signals. It can connect to 8-channel PT100 sensor.It is suitable for temperature measurement in low voltage switch cabinet electrical contacts, transformer windings, motor windings and other occasions.It is mainly applied to temperature survey and control in thermal power plant and water power plant.

ADL3000-E three phase electric meter is designed for three phase energy measurement on low voltage system and EV charging pile. The meter meet the related technical requirements of electronic meter in the IEC62053-21、IEC62053-22 standards.

ADL100-ET single phase electric meter is designed for single phase energy measurement on low voltage system and EV charging pile. The meter meet the related technical requirements of electronic meter in the IEC62053-21、IEC62053-22 standards.

AID150 alarm and display device is designed for visual and audible indication of alarm messages from ACREL medical intelligent insulation monitor and residual current monitor.

AID120 alarm and display device is designed for visual and audible indication of alarm messages from ACREL medical intelligent insulation monitor and residual current monitor.

AID10 remote and alarm indicators are installed beside the intelligence panel in the operating room so that medical personnel can immediately receive a notification when there is power supply failure.

● Measurement: three phase voltage,current,power,power factor,etc. 
● Communication:RS485,LoRa,NB,2G,4G,WiFi 
● Max demand 
● Accuracy:Class 1